How to: DIY RC Crawler Light Bar
In this video I show you how to make your own super bright LED light bar for about $10, give or take. There are a number of ways to make this bar depending on your skill level.
3D Print files:
Parts needed:
3/8" or 1/2" aluminum c-channel from your local hardware store
LED light bar
DRL:
Bare:
Homemade or 3D printed mounts
Qty 8 M3x8mm panhead or button head screws
Qty 4 M3 lock nuts
Qty 4 M3x6mm nuts (if using the adjustable printed mounts)
Qty 4 M2x4mm countersunk (optional) screws. Use 6mm if you don't go with countersunk
JST plugs & pins ()
22AWG wire
Procedure:
My procedure was too long to fit here, so you'll have to follow this link to my procedure on the RC Crawler forum:
Music by Whitesand - Nostalgic Piano Music - One Way Home,
3D Print files:
Parts needed:
3/8" or 1/2" aluminum c-channel from your local hardware store
LED light bar
DRL:
Bare:
Homemade or 3D printed mounts
Qty 8 M3x8mm panhead or button head screws
Qty 4 M3 lock nuts
Qty 4 M3x6mm nuts (if using the adjustable printed mounts)
Qty 4 M2x4mm countersunk (optional) screws. Use 6mm if you don't go with countersunk
JST plugs & pins ()
22AWG wire
Procedure:
My procedure was too long to fit here, so you'll have to follow this link to my procedure on the RC Crawler forum:
Music by Whitesand - Nostalgic Piano Music - One Way Home,
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising