This is another ultra-light frame. The Hantu frame from FlamigoRC was most likely designed from pictures of the original Mode 2 Ghost frame. It was not a direct copy as the top plate mounting holes are not identically spaced. The frame seems as solid as its competitors. The arms are slightly wider than other frames which should help since the arms are only 4mm thick instead of 5mm. "Hantu" in Malaysia means "Ghost".
Adding an additional lock nut below each spacer and replace the spacer screws with 20mm M3 screws should really strengthen the arms and keep the screws from vibrating loose.
======================================================
You can get your own here:
Hantu 5" frame:
Update:
There are new Hantu frames that supports 3", 4", and 6" props:
3" Prop Support:
4" Prop Support:
6" Prop Support:
Modified Ghost canopy for the Hantu frame:
Hantu 40mm Shark Fin Top Plate:
Hantu 30mm Shark Fin Top Plate:
Hantu Antenna Mount and RunCam Micro Swift mounts (right sizes):
Hantu AXII Antenna Mount:
Original Ghost Frame: /