DIY Jet | FT X-29 BUILD
Build a DIY foamboard X-29 NASA Jet!
Get the speed build kit: /
Get Power Pack C: /
3.5mm bullet extensions: /
Servo extensions: /
Servo centering tool: /
Z-Bend crimper: /
Free Plans:
Also available through AMain, Hobbytown USA, Graupner Europe
Check out the release video:
Find out more about FT STEM: /
|--Build Index--|
00:53 Center Fuselage
23:57 Nose
45:50 Wing and Servos
01:09:44 Prop Motor and ESC Installation
01:22:00 EDF and ESC Installation
01:36:47 Attaching the Wings to the Fuselage
01:44:26 Tail Assembly, Canard, Finish Canopy
02:03:00 Control Linkages and Programming
02:12:02 Maiden
Other helpful videos:
6 Tips For a Successful First Flight:
No Knife - Building:
Beginner Series:
Get the speed build kit: /
Get Power Pack C: /
3.5mm bullet extensions: /
Servo extensions: /
Servo centering tool: /
Z-Bend crimper: /
Free Plans:
Also available through AMain, Hobbytown USA, Graupner Europe
Check out the release video:
Find out more about FT STEM: /
|--Build Index--|
00:53 Center Fuselage
23:57 Nose
45:50 Wing and Servos
01:09:44 Prop Motor and ESC Installation
01:22:00 EDF and ESC Installation
01:36:47 Attaching the Wings to the Fuselage
01:44:26 Tail Assembly, Canard, Finish Canopy
02:03:00 Control Linkages and Programming
02:12:02 Maiden
Other helpful videos:
6 Tips For a Successful First Flight:
No Knife - Building:
Beginner Series:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690
Heee Wiiiinggggg - an 690mm triangle wing, with big battery bay, and up to 220 km/h speeds! Easy... -
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb... -
DLG - FLITZ - soaring joy!
The joy of DLG soaring! Pilot and Wing owner - Andrius Narbutas Bright LED: / - More products ...

Advertising