FIX YOUR BRICKED SPRACING F3 BOARDS-Programming failed | No Response From Bootloader | Flashing
Download:
Easy way to fix "failed to connect to serial port" , "programming failed, no response from bootloader", solid blue light, and most other problems. Use the same process for the naze, but don't
change baud rate and download firmware for naze.
Steps:
-disconnect board
-short bootloader pins
-open up stm flasher
-set baudrate to 256000
-download firmware hex file
-flash
-un-short boot pins
Easy way to fix "failed to connect to serial port" , "programming failed, no response from bootloader", solid blue light, and most other problems. Use the same process for the naze, but don't
change baud rate and download firmware for naze.
Steps:
-disconnect board
-short bootloader pins
-open up stm flasher
-set baudrate to 256000
-download firmware hex file
-flash
-un-short boot pins
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising