FPV: HMB-235 Maiden and Review
My HMB-235 FPV maiden flight at the park.
Specs:
=====
- HMB-235 Frame ("Hold My Beverage")
- Lumenier 2000kV 2206 Motors
- SN20A BLHeli ESC's
- CC3D 15.02
- FatShark FPV
- Immersion RC 600mW VTX
- RunCam HD
- 4S 1300mAh
- FrSky D4R-II
Still needs New FPV cam and LED's.
Build log here:
Specs:
=====
- HMB-235 Frame ("Hold My Beverage")
- Lumenier 2000kV 2206 Motors
- SN20A BLHeli ESC's
- CC3D 15.02
- FatShark FPV
- Immersion RC 600mW VTX
- RunCam HD
- 4S 1300mAh
- FrSky D4R-II
Still needs New FPV cam and LED's.
Build log here:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
Enduro Rally 2021 - Pabradė military base
Had a wonderful opportunity to be in a very dirty place on a badly rainy morning but with great a... -
#DriftMolėtai "Street" drift race finals 2022
Happy drift day! Had a chance to be part of Moletai street drift race Finals! #DriftMolėtai grį... -
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb...

Advertising