Specification:
Brand Name: LDARC
Model: KK 5GT
Item Name: 213mm F4 OSD FPV Racing Drone
Version: PNP ( Without Receiver and Battery)
Wheelbase: 213mm
Material: Carbon Fiber & 7075 Aluminum Alloy
Input Voltage: 3-4S
Recommend Battery: 4S 1300-1800mAh above 25C Lipo
Weight: 336.7g (Without Receiver and Battery)
| 213mm Frame Kit |
Wheelbase: 213mm Material: Carbon Fiber & 7075 Aluminum Alloy Arm Thickness: 5mm Weight: 102.5g |
|
KK Super Flytower FC AIO VTX |
Tower Monting Hole: 30.5x30.5mm Tower Height: 16.5mm ( Include heat sink ) Tower Weight: 28.9g F4 Flight Controller Integrated with VTX Module: Chip: STM32f405 MCU Gyro: MPU6000 Firmware: OMNIBUSF4SD OSD: Betaflight OSD With 5V @ 3A ( VTX and FC have been used. Suggest less than 6 LED ) ( If use more than 6 LED, please use BEC Module ) Support PPM Recceiver/SBUS/DSMX Receiver ( PPM Receiver need solder the pad) Channel: 48CH Power: Off/25/200/600mW ( TX control through the FuriousFPV /Tramp peropheral protocol ) Camera Voltage: 5V Weight: 11.3g Size: 36x36mm ( 30.5x30.5mm Mounting Hole) |
|
KK Super Flytower 40A BLheli_S 4 in 1 ESC |
Working Voltage: 2-4S Lipo Con. Current: 40A Peak Current: 45A (5S) Firmware: BLheli_S/Dshot150/DShot300/DShot600 16.6 (G_H_30) Size:39x41mm ( with pad ) Moutning Hole: 30.5x30.5mm Weight: 12.5g Support BLHeliSuite setting -Integrated PDB, -Integrated Battery Monitoring - Integrated FC Power |
| XT2306 2500KV Motor |
Model: XT2306 KV: 2500KV Lipo Battery: Support 3-4S Shaft: M5 Motor Width: 28mm Motor Height: 31.7mm Weight: 34.1g |
| 5150 3-Blade Propeller |
Kingkong 5150 5 Inch 3-Blade Propeller Color: White Quantity: 5 Pairs ( 5 CW & 5 CCW) |
| FPV Camera |
Runcam Swift Mini 600TVL FOV160 CCD Camera NTSC |
Package Included:
1x LDARC KK 5GT 213mm Drone
5x 5150 Propeller CW & CCW
1x Magic Tie
4x Motor Base
1x Antenna
5x Strap
1x Manual
Advertising