GB210 210mm Wheelbase Quadcopter DIY Frame Kit

GB210 210mm Wheelbase Quadcopter DIY Frame Kit
Seller: GearBest,
Main Features:
Len's seat pitch ( support CCD, CMOS camera board aircraft )
Upper body version with a plurality of antenna holes to facilitate fixed antenna
Body with 1.5mm 3K full carbon fiber
3mm 3K full carbon arm
Rational layout, easy to install
ESC can be installed arm, it can also be installed in the fuselage
Compatible AOMWAY 700 line camera mounts

Specifications:
210mm airframe specifications:
Diagonal wheelbase: 210mm
Rack weight: 80g
Support motor: 1306 3000KV / 1804 2300KV / 1806 2300KV ( 1806 / 4045 recommend inch paddle )
Support propeller: 4 or 5 inch
Color: black
Mounting dimension: 200 x 165 x 62 mm
Net weight: 91g

Acro SP3 specifications:
6DOF
Panel color: black
Board size: 35 x 35 x 8 mm / 1.4 x 1.4 x 0.3 inch
Net weight: 23g
Package weight: 29g

EMAX RS2205 brushless motor specifications:
Weight: approx. 30g with wires
Wire AWG: 20AWG
Stator diameter: 22mm
Stator height: 5mm
Shaft diameter: 3mm
Configuration: 12N14P
Motor diameter: 27.9mm
Motor height: 31.7mm
Prop adapter shaft thread: M5
Input voltage: 3 - 4 S ( 12.6 - 16.8 V )
KV2300 with HQ5045 BN max. thrust: 1024g

30A mini ONESHOT ESC specifications:
BEC: none
Current: 30A
Burst current: 35A up to 10 seconds
Bootloader: BLheli
MCU: SiLabs
Firmware: BLheli 14, OneShot ready
Battery: 2 - 6 S LiPo
Size: 35 x 17 mm
Weight: 11g with wires

PCB ( 5 - 12 V ) specifications:
2oz copper and 4-layers PCB
Solder bridges of various voltage for camera and VTX
DC / DC synchronous buck regulator, efficiency is up to 95 percent
TVS( transient voltage suppressor ) protection for DC / DC chip
Dimensions: 36 x 36 mm
Weight: 6g
Mounting holes: 30.5mm square spacing
12.4 - 16.8 V, 1300 - 1800 mAh ( 3 - 4 S ) battery ( not included )

Specifications

General

Type: Frame Kit

Dimension and Weight

Product weight: 0.580 kg
Package weight: 0.725 kg
Product size (L x W x H): 20.00 x 16.50 x 6.20 cm / 7.87 x 6.5 x 2.44 inches
Package size (L x W x H): 28.00 x 18.00 x 8.00 cm / 11.02 x 7.09 x 3.15 inches

Package Contents

Package Contents: 1 x Quadcopter Frame, 4 x Motor, 4 x ESC, 4 x CW Propeller, 4 x CCW Propeller, 1 x F3 Flight Controller, 1 x Power Distribution Board, 1 x Accessory Set



Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.

Disclaimer:
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.

Note:
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.

Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.


More similar


Add Comment




All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.) Powered by MiReina.lt