Durafly Tomahawk FPV flight test (Runcam Swift 3 Micro camera)
I didn't get an FPV flight test into the review video so here it is, better late than never. This thing was surprisingly stable given the strength of the wind today at higher altitudes. Not too slow and plenty maneuverable.
For this flight I fitted the 1000mAH Graphene battery from HobbyKing but the model required quite a bit of up-trim to fly level with the forward CG this produced. One cell in the battery I used was also bad but I still got nearly 8 minutes of flight time at relatively high throttle settings.
The Runcam Swift 3 Micro also put on a good performance in the very challenging lighting conditions. The dirt-bike area is about 500m-600m from where we were standing.
Model configuration:
- Durafly Tomahawk
- Runcam Swift micro 3 FPV camera
- Turnigy Graphene 1000mAH 4S battery
- AOMWAY Commander goggles/DVR
- BeeRotor Honeydrop antenna
For this flight I fitted the 1000mAH Graphene battery from HobbyKing but the model required quite a bit of up-trim to fly level with the forward CG this produced. One cell in the battery I used was also bad but I still got nearly 8 minutes of flight time at relatively high throttle settings.
The Runcam Swift 3 Micro also put on a good performance in the very challenging lighting conditions. The dirt-bike area is about 500m-600m from where we were standing.
Model configuration:
- Durafly Tomahawk
- Runcam Swift micro 3 FPV camera
- Turnigy Graphene 1000mAH 4S battery
- AOMWAY Commander goggles/DVR
- BeeRotor Honeydrop antenna
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb... -
Enduro Rally 2021 - Pabradė military base
Had a wonderful opportunity to be in a very dirty place on a badly rainy morning but with great a... -
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690
Heee Wiiiinggggg - an 690mm triangle wing, with big battery bay, and up to 220 km/h speeds! Easy...
Advertising