Iconic-X FPV with RCtimer Brushless Gimbal Set Up
This is my Iconic-X FPV frame fitted with a RCtimer brushless gimbal.
SET UP:
Frame: Iconic-X FPV
FC: DJI Naza with GPS
ESC: Turnigy Multistar 30a
Motor: SunnySky 800KV
Props: APC 10X4.7
Video transmitter: 1.3GHZ
Radio control system: EZuhf
FPV:
Cameras: 600TVL SONY Super HAD CCD D-WDR / GoPro Hero3
A/V TX: RangeVideo 1.28GHz 600mW TX w/ Low Pass Filter
AV RX: 2x Lawmate 8ch RX
Diversity Controller: Eagle Tree EagleEyes
Antennas: 1.28 GHz Cloverleaf and Skew planar with IBcrazy Cross hair receiver antenna
Displays: FatShark Dominator Video Goggles
Gimbal: RCtimer 2 axes brushless gimbal with RCtimer open source brushless control board.
SET UP:
Frame: Iconic-X FPV
FC: DJI Naza with GPS
ESC: Turnigy Multistar 30a
Motor: SunnySky 800KV
Props: APC 10X4.7
Video transmitter: 1.3GHZ
Radio control system: EZuhf
FPV:
Cameras: 600TVL SONY Super HAD CCD D-WDR / GoPro Hero3
A/V TX: RangeVideo 1.28GHz 600mW TX w/ Low Pass Filter
AV RX: 2x Lawmate 8ch RX
Diversity Controller: Eagle Tree EagleEyes
Antennas: 1.28 GHz Cloverleaf and Skew planar with IBcrazy Cross hair receiver antenna
Displays: FatShark Dominator Video Goggles
Gimbal: RCtimer 2 axes brushless gimbal with RCtimer open source brushless control board.
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising