Runcam Split v1 with Foxeer 2.5mm IR block lens
Trying out a Foxeer 2.5mm lens. I had a very stiff easterly wind on this flights, but with sunny spells which helped the light conditions for the image test. So far I think the video quality seems a bit better, color and contrast wise, FOV seems about the same as with standard lens.
Gear:
-Racerstar StarF3S 30A BL_S 4 In 1 ESC 5V BEC w/ F3 Flight Controller AIO OSD BEC with Current Sensor
- RCX RS1407 3400KV Motors
-DALProp T4045 V2 Props
-Iflight iX4 frame (4mm thick)
-Original Runcam Split (v1) Foxeer 2.5MM Lens IR blocked
-VT5804 Pro 5.8G 48CH 25mW/200mW/600mW Switchable S.BUS FPV Transmitter.
Gear:
-Racerstar StarF3S 30A BL_S 4 In 1 ESC 5V BEC w/ F3 Flight Controller AIO OSD BEC with Current Sensor
- RCX RS1407 3400KV Motors
-DALProp T4045 V2 Props
-Iflight iX4 frame (4mm thick)
-Original Runcam Split (v1) Foxeer 2.5MM Lens IR blocked
-VT5804 Pro 5.8G 48CH 25mW/200mW/600mW Switchable S.BUS FPV Transmitter.
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
#Shorts massive servo wire attack
About 200 packs and 1000 servo leads in free fall For many many many planes to build! #shorts ... -
DLG - FLITZ - soaring joy!
The joy of DLG soaring! Pilot and Wing owner - Andrius Narbutas Bright LED: / - More products ... -
Deathstroke 3d printed wearable mask #shorts
Deathstroke 3d printed wearable mask with X1C BambuLab #shorts #3dprinting #deathstroke #bamb...
Advertising