DIY: FPV backpack build part 3 (camera)
How to modify the camera leads to work with the FPV backpack system.
By cutting off the heavy and bulky BNC and barrel connectors that come with the camera and replacing them with a servo-extension lead, the camera can then be easily connected and disconnected from the backpack itself.
This setup has the added bonus that you can move your camera further from the transmitter board and antenna simply by using a regular servo-extension.
You can also set up several different cameras or backpacks and swap between them very easily.
The review for the camera used in this project can be watched here:
By cutting off the heavy and bulky BNC and barrel connectors that come with the camera and replacing them with a servo-extension lead, the camera can then be easily connected and disconnected from the backpack itself.
This setup has the added bonus that you can move your camera further from the transmitter board and antenna simply by using a regular servo-extension.
You can also set up several different cameras or backpacks and swap between them very easily.
The review for the camera used in this project can be watched here:
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising