Tools needed to build an FPV Quadcopter // An Overview

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
Want to build your first quadcopter either by following our Build Along series or venture into this all on your own? This video covers most of the tools that I use and would recommend using when building an FPV Quadcopter.
List of tools:
- HIGH QUALITY Soldering Iron
- Solder Sucker
- 60/40 Solder
- Glue Gun
- HIGH QUALITY Hex Key set (You only really need 2mm and 2.5mm)
- Heat Shrink
- Lighter
- Scissors
- Electrical Tape
- Cable ties
- Prestick (or Blu-Tack)
- Double-sided Tape
- Silicon wire (22AWG for signal and 5c wires, 18AWG for ESC's and 14AWG for XT60)
- Tweezers
- 8mm Spanner / Shifting Spanner
- (Not necessary) Digital Caliper
- (Not necessary) Multimeter
- (Not necessary) Box of quad hardware which you'll collect over time
---
Want Premium FPV Flying and Technical support? Checkout the FPV Pilot Support Program!
FPV Pilot Support Program: www.patreon.com/fpvacademy
---
Stay in touch!
Facebook:
Instagram:
Twitter:
---
Tools needed to build an FPV Quadcopter // An Overview
Tools needed to build an FPV Quadcopter // An Overview
Tools needed to build an FPV Quadcopter // An Overview
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.) Powered by MiReina.lt