BUILD LOG: The best HUBSAN ever made: Chaoli 820 + AIOF3 OSD FrSky Rx (stealth build)
The Hubsan H107 series were my first quads and are mainly responsible for my involvement in the hobby.
They are perfect for learning how to fly and familiarize with the controls of a quadcopter. They are reliable, stable flyers and they look nice.
This is sort of a tribute to my first quad and the only goal is to make the BEST Hubsan ever made..
More of a Build Along than just a build log, aimed to inspire you to perform similar mods and adjusting to the problems that occur at each step of the building and modifying process.
This stealth build features Chaoli 820 motors, Eachine TX-01 (25mW) all-in-one fpv camera and the AIOF3_BRUSHED flight controller with built-in OSD and FrSky receiver. The shell is from a Hubsan H107C (top part from a black frame / bottom part from a red frame) and the propellers are the JJRC 1000A, which perform well and fit the color scheme of the frame parts nicely. It is relatively lightweight -taking into consideration that the frame itself is approx. 12g - and the 300mah nanotechs give lots of punch, while keeping the AUW low.
This is BUILD LOG: The best Hubsan ever made (stealth build). Let's go!
____________________
*If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!
Equipment used in this video:
Hubsan H107C frame:
Chaoli 820 motors:
Eachine AIOF3_BRUSHED F/C:
Alternative AiO F/C board (Aurora RC):
Eachine TX-01 FPV AiO:
JJRC 1000A-06 props:
Turnigy Nano-tech 300mah batteries:
You may also want to check out the following videos:
More detailed guide on how to replace a cloverleaf with a whip antenna:
More detailed guide on how to separate the camera board from the VTx board:
Review of the Eachine TX-01 FPV AiO camera combo:
Review of the Eachine AIOF3_BRUSHED flight controller:
FPV AiO micro cameras roundup:
-------------------------------
This video features the song "Tell Me" by Lyvo, available under a Creative Commons License
Song link:
Artist link:
CC-by license: /
-------------------------------
#muteFPV
#FPVbuild
#Hubsan
They are perfect for learning how to fly and familiarize with the controls of a quadcopter. They are reliable, stable flyers and they look nice.
This is sort of a tribute to my first quad and the only goal is to make the BEST Hubsan ever made..
More of a Build Along than just a build log, aimed to inspire you to perform similar mods and adjusting to the problems that occur at each step of the building and modifying process.
This stealth build features Chaoli 820 motors, Eachine TX-01 (25mW) all-in-one fpv camera and the AIOF3_BRUSHED flight controller with built-in OSD and FrSky receiver. The shell is from a Hubsan H107C (top part from a black frame / bottom part from a red frame) and the propellers are the JJRC 1000A, which perform well and fit the color scheme of the frame parts nicely. It is relatively lightweight -taking into consideration that the frame itself is approx. 12g - and the 300mah nanotechs give lots of punch, while keeping the AUW low.
This is BUILD LOG: The best Hubsan ever made (stealth build). Let's go!
____________________
*If you like my content and want to support the channel, you can use the affiliate links below. I get a small kickback from the store if you decide to buy something and it costs nothing extra to you.
Thank you in advance!
Equipment used in this video:
Hubsan H107C frame:
Chaoli 820 motors:
Eachine AIOF3_BRUSHED F/C:
Alternative AiO F/C board (Aurora RC):
Eachine TX-01 FPV AiO:
JJRC 1000A-06 props:
Turnigy Nano-tech 300mah batteries:
You may also want to check out the following videos:
More detailed guide on how to replace a cloverleaf with a whip antenna:
More detailed guide on how to separate the camera board from the VTx board:
Review of the Eachine TX-01 FPV AiO camera combo:
Review of the Eachine AIOF3_BRUSHED flight controller:
FPV AiO micro cameras roundup:
-------------------------------
This video features the song "Tell Me" by Lyvo, available under a Creative Commons License
Song link:
Artist link:
CC-by license: /
-------------------------------
#muteFPV
#FPVbuild
#Hubsan
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
DeathStroke BambuLab X1C #Shorts
#shorts DeathStoke wearable mask made with BambuLab X1C #3dprinting -
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690
Heee Wiiiinggggg - an 690mm triangle wing, with big battery bay, and up to 220 km/h speeds! Easy... -
Auto moto parkas 2021-11-28 SandBOX
Auto moto parkas 2021-11-28 SandBOX Daugiau informacijos: / #sandbox #amp #moto --------------...

Advertising