How to do about how you can flash betaflight 3.1 on the "AIO F3 V4 Flight Control Board with 25mW 200mW 600mW Switchable Transmitter OSD BEC PDB Current Sensor"
--------------------------------------------------------------------------------------------------
➲ Watch also our latest Upload Playlist: ✓
--------------------------------------------------------------------------------------------------
THERE IS AN UPDATE VERSION of the board V5 Banggood LINK (refferal) . and setup it.
Also, a step by step how to you can enable Dshot and config it.
I Tested it with Dshot 600.
I flashed the betaflight_3.1 SPRACINGF3.hex (Update: 3.1.6 is out now How to on intofpv.com is updated!)
Also you can find here a new video about flashing Betaflight 3.1.6 and config!
(link for how to flash Dshot is below!) to use Dshot600 with ZMX X20 and Gemfan Maveric ESC
On The Maveric ESC, I Flashed the "2.2.0 Firmware" Dshot ready!
What I can say is that the build is really clean with the board I only added a 25V 500m Cap on the BAT +- to smooth out all!
on the end of the video, I added a test flight.
I Like the board the Video Link is strong and the Image qualität is really nice compared to other Boards I used TBS Triumph Antennas for this test!
and for the price tag, it is perfect!
for Telemetry:
UART1: USB+OSD
UART2: GPS
UART3 : SBUS
Softserial 1: FrSky S.port telemetry (have to use the CH5 and CH6 wires on the PWM plug)
I made here a little howto you can flash and config Dshot to your FC and ESC.
--------------------------------------------------------------------------------------------------
➲ SUBSCRIBE to our channel
➲ LIKE SHARE AND ✓ Please leave a comment ✍
♥ THANKS FOR WATCHING and Supporting us
--------------------------------------------------------------------------------------------------
So fly save deep and fast and have FUN!!
--------------------------------------------------------------------------------------------------
KerniFPV
here you find me on other Social media Sides
➲ Instagram - /
➲ Youtube -
➲ FPVBook - /
➲ Facebook -
➲ Twitter -
➲ Rotorbuilds.com -
➲ Amazon -
--------------------------------------------------------------------------------------------------
Parts
Frame: Lisam 210
FC: TBS Vision Cube on Betaflight 3.1.5 with Dshot
(here you can find a howto )
ESC: DYS XS 30A on Dshot 600
(Here a video about flashing and config dshot
Motors: ZMX Fusion 2300kv X25 (soft mounted with tape)
Props: 3x5x45" HQ 5x4,5x3 BN
Batterie: Acehe 1500mAh 75C
VideoTR: TBS Vision Cube
Antena: TBS Triumph
Receiver: TBS Crossfire
FPV Cam: HS1177 with HD Lens
FPV Goggles: Fatshark Transformer HD
HD Cam: GoPro Session S4
#############################################
Video and other useful Copter Staff that I use! (Referral Links)
Lipo Loader: iSDT SC-620 500W 20A MINI
Parallel Charging Board: ISDT XT60
USB Power Bank: Xiaomi 10000mAh
Film cam: GoPro HERO 5 Session
Gopro Schutz folie:
64GB SD Card:
Tripod Mount:
64GB SD Card:
Tripod Mount: