FPV40 - Design and Maiden Flight

Video Channel
Please help us to find bad videos. Broken or unappropriated video content?
My original design, the FPV40, a medium sized FPV plane that can carry a GoPro. PDF's available!
PDF's!: /
My inspiration for this rc plane was to make a medium sized FPV plane out of a single sheet of 20" x 30" foam board. It has 440 square inches of wing area, so it should be great for some basic FPV flying!
PDF's: Thanks to intensewalkera, check him out on YouTube at
It has a 40 inch wingspan (tip to tip), 13 inch root chord, 8 inch tip chord (including 2 inches of elevon), and 14 inches of sweep. The KFM2 airfoil is at 50% wing chord and is made of 1/2 inch wall insulation foam board (pink foam).
Center of Gravity: 8.25 inches back from the front
Program expos on your transmitter! Ailerons at 30% and elevator at 40%
Weight, without the battery: 450 grams (with the motor and ESC)
Motor: RCHotDeals 2212-13 1000 kV ~ 50 gram motor
Prop: 10x5
ESC: 18A Volcano Exceed RC
Battery: 2500 mAh 11.1v 3S 25C
Servos: 9 gram T-Pro
Receiver: Spektrum AR6210
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user, if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.

All Rights Reserved and belong to their respective owners. (Logos, Photos, Videos and etc.) Powered by MiReina.lt