Reptile 500 Quadcopter re build with KK2.1 HC 2836 1000kV Motors and Turnigy Plush ESCs
Taking off the PIXHAWK to put on my Tarot FY-680.
Re-Building the Reptile 500 with my favourite flight controller. KK2.1HC with RC911 Firmware
Rotated 90 degrees so cabling is out front and back. Works well with this frame.
Turnigy 2836 1000kV Motors
Turnigy Plush 30A ESCs
ESCs are direct soldered with a wiring loom onto the XT60 connector
Using the Turnigy TGY-I6 Controller. 6 Channel.
Re-Building the Reptile 500 with my favourite flight controller. KK2.1HC with RC911 Firmware
Rotated 90 degrees so cabling is out front and back. Works well with this frame.
Turnigy 2836 1000kV Motors
Turnigy Plush 30A ESCs
ESCs are direct soldered with a wiring loom onto the XT60 connector
Using the Turnigy TGY-I6 Controller. 6 Channel.
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising