Finally I got around to doing the backlight mod on my FrSky Taranis X9D PLUS transmitter. I have wanted to convert the stock blue / cold white color of my stock display to a shade of orange for so long! And also replace my scratched screen cover while I am at it...
As a mod it is pretty much straight-forward: access the stock SMD LEDs and replace them with the color combination of your choice. In the backlight settings of the X9D you can adjust the intensity of each of the two LED colors and achieve the color you need.
Performing the mod is where it becomes tricky. Putting my carelessness aside, which was the reason why I damaged the ribbon cable of my display, the panel of the backlight was so well stuck to the PCB boards of the LEDs that I had to break the two short edges, in order for it to be detached. I hope yours has not adhered so firmly... Thanks to Minichado for helping out - also thanks to KokoblokoFPV for his spare LCD display :)
If you find SMD soldering intimidating, just make sure you use a fine clean tip, thin solder and tweezers. There is plenty of room around the LEDs so take your time and solder them one by one, flush to the board. If you have never soldered SMD before, make sure you practice before performing this mod.
This is QUICK GUIDE: Taranis mods #5 - Backlight mod (SMD LED replacement) and custom display bezel - Let's go!
____________________
*If you like my content and want to support the channel, you can tip my 'piggy bank' via PAYPAL, here:
------------------------------
* You can also use the following affiliate links, or bookmark the store links at the end of the description - I get a small kickback from some of these stores if you decide to buy something and it costs nothing extra to you.
* Subscribe for more unique content, here:
Thank you in advance!
Soldering iron
(Banggood)
(Gearbest)
(Ebay)
(FPVmodel)
Fine soldering tip
(Banggood)
(Ebay)
(Gearbest)
Thin solder (I used 0.25mm from Cynel)
(Ebay)
Flux pen
(Banggood)
(Ebay)
Solder wick
(Banggood)
(Ebay)
ESD Tweezers
(Banggood)
(Ebay)
SMD LEDs (I used 0805 size)
(Banggood)
(Ebay)
SMD LEDs (0603 size)
(Banggood)
(Ebay)
Custom made display bezel (inlay) by BludzFPV
(BludzFPV)
Replacement LCD with backlight
(AliExpress)
Taranis X9D Plus SE
(Banggood)
(HorusRC)
Taranis X9D Plus
(Banggood)
(HorusRC)
(HobbyKing)
You can also take a look at my other Taranis mods videos, to get more ideas or find more info on the accessories and hydrodip case I have used:
Cheap and Easy mods and accessories:
Hydrodipped shell swap:
M9 gimbal installation:
Taranis SE mods:
You can find the relevant playlist here:
====================
HOW TO SUPPORT THE [MuteFPV] CHANNEL:
----------------------------
You can tip my 'piggy bank' via PAYPAL, here:
You can also click or save these convenient BOOKMARKS in your browser and use them to visit the websites, before purchasing new goodies:
BANGGOOD (opens the RC Toys & Hobbies category, showing the Newest products):
GEARBEST (opens the Toys & Hobbies R/C category, showing the Newest products):
EBAY (the shortlink has to be bookmarked):
FPVMODEL (newest products):
HORUSRC (main page):
A huge THANK YOU in advance for your support!
====================
-------------------------------
This video features the song "Come on Take me Over" by SK beats, available under a Creative Commons License
Song link:
Artist link:
CC-by license: /
-------------------------------
#TaranisMods
#muteFPV
#FrSky
#FrSkyTaranis