Emax Tinyhawk camera upgrade & antenna replacement (Caddx EOS & Actuna VeeRace) - QUICK GUIDE
I have been scratching my head trying to figure out the best way to mount a Caddx EOS camera inside the frame of the Tinyhawk without adding much weight and without compromising how crash-resistant it is. And I think I finally found it :D
All you need is 2 pieces of zip ties (I used 2.5mm wide) and a bit of patience. Crash tested and confirmed: it works like a charm!
As for the antenna replacement, if you are looking to fix the flashing issues in the DVR recordings, better go for a complete VTx swap instead. I will not be using the DVR from the Tinyhawk for anything more than just a backup in case of a crash, so I will probably not bother with an upgrade.
This is QUICK GUIDE: Emax Tinyhawk camera upgrade & antenna replacement (Caddx EOS & Actuna VeeRace) - Let's go!
____________________
All you need is 2 pieces of zip ties (I used 2.5mm wide) and a bit of patience. Crash tested and confirmed: it works like a charm!
As for the antenna replacement, if you are looking to fix the flashing issues in the DVR recordings, better go for a complete VTx swap instead. I will not be using the DVR from the Tinyhawk for anything more than just a backup in case of a crash, so I will probably not bother with an upgrade.
This is QUICK GUIDE: Emax Tinyhawk camera upgrade & antenna replacement (Caddx EOS & Actuna VeeRace) - Let's go!
____________________
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising