RC Delta Wing - Design and Maiden
MORE INFO and NOTES and PDF's FOR THIS PLANE:
PDF's: /
It is hard to get the center of gravity correct on this plane when the motor is in a pusher setup. I would NOT recommend making this a pusher, I have tried and had to use a large battery to get it to balance. That being said, I have made a 60 inch version of this wing and it is a pusher with no problems.
This is an RC delta wing that I designed. It has a 30 inch wingspan (tip to tip), 11.5 inch root chord, 9 inch tip chord (including 2 inches of elevon), and 11 inches of sweep. The KFM2 airfoil is at 50% wing chord and is made of 1/2 inch wall insulation foam board (pink foam).
Center of Gravity: 7 inches back from the front
Make sure that you program expo on your transmitter for ailerons and elevator! I did about 30% on the aileron control and 40% on the elevator control and this worked great for me.
Weight, without the battery: 260 grams (this is with the motor and ESC)
Motor: Turnigy 2730 1500 kv - with an 8mm LightFlite Magic Motor Mount
Prop: 8x4
ESC: 18A Volcano Exceed RC
Battery: 1300 mAh 11.1v 3S 25C
Servos: 9 gram T-Pro
Receiver: Orange Rx DSM2 Compatible
PDF's: /
It is hard to get the center of gravity correct on this plane when the motor is in a pusher setup. I would NOT recommend making this a pusher, I have tried and had to use a large battery to get it to balance. That being said, I have made a 60 inch version of this wing and it is a pusher with no problems.
This is an RC delta wing that I designed. It has a 30 inch wingspan (tip to tip), 11.5 inch root chord, 9 inch tip chord (including 2 inches of elevon), and 11 inches of sweep. The KFM2 airfoil is at 50% wing chord and is made of 1/2 inch wall insulation foam board (pink foam).
Center of Gravity: 7 inches back from the front
Make sure that you program expo on your transmitter for ailerons and elevator! I did about 30% on the aileron control and 40% on the elevator control and this worked great for me.
Weight, without the battery: 260 grams (this is with the motor and ESC)
Motor: Turnigy 2730 1500 kv - with an 8mm LightFlite Magic Motor Mount
Prop: 8x4
ESC: 18A Volcano Exceed RC
Battery: 1300 mAh 11.1v 3S 25C
Servos: 9 gram T-Pro
Receiver: Orange Rx DSM2 Compatible
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising