CC3D with CleanFlight - Setup
I flash my HobbyKing 250 LF experimental quadcopter with CC3D with the CleanFlight Firmware and see how it flies.
CleanFlight is available at:
/
Copter frame:
The copter flown in this video:
- HobbyKing 250 LF
- EMAX PM1806 2300Kv motors
- CC3D with CleanFlight flashed Firmware
- 3S 1300Mah Battery
- Immersion RC 5.8Ghz 600mW Video transmitter
- FlySky 2.4Ghz 6 Channel Receiver
- PWM to PPM converter from ReadyToFlyQuads.com
- 700 TVL Board FPV Camera
- 808 #16 720 Video Camera
- 5V external BEC
CleanFlight is available at:
/
Copter frame:
The copter flown in this video:
- HobbyKing 250 LF
- EMAX PM1806 2300Kv motors
- CC3D with CleanFlight flashed Firmware
- 3S 1300Mah Battery
- Immersion RC 5.8Ghz 600mW Video transmitter
- FlySky 2.4Ghz 6 Channel Receiver
- PWM to PPM converter from ReadyToFlyQuads.com
- 700 TVL Board FPV Camera
- 808 #16 720 Video Camera
- 5V external BEC
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Watch more videos
-
#DriftMolėtai "Street" drift race finals 2022
Happy drift day! Had a chance to be part of Moletai street drift race Finals! #DriftMolėtai grį... -
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690
Heee Wiiiinggggg - an 690mm triangle wing, with big battery bay, and up to 220 km/h speeds! Easy... -
DeathStroke BambuLab X1C #Shorts
#shorts DeathStoke wearable mask made with BambuLab X1C #3dprinting
Advertising