ZMR250 V2 Mini Quad - ARF Kit - Build - Maiden Flight - Part 2
The Updated ZMR250 from FPVModel.com, ARF Kit, Final Build and Test Flight. Probably one of the most popular budget FPV Quads on the market at the moment. FPV Models have made the following changes to their V1 ZMR250
In this video we’ll cover some of the ARF options with this kit, go through our build and what parts we used, then follow it up with a first flight and you will be seeing it’s first ever flight.
On this quad, we’ve flashed the ESC to BLHeli V14 and enabled oneshot. The ESCs are mounted internally to allow for a cleaner build. We used Bullnose props instead of the 5030 since we needed more thrust due to carrying the heavier weight of the GoPro.
NOTE: I printed 4mm PLA 3D printed washers that go between the PDB and bottom Plate which which means the top plate is secured through to the bottom carbon plate and that addresses the problem of upside down crash impact transferring just to the PDB Board.
AUW (Less Battery)
501g
Initial PIDs used during this flight
Cleanflight V1.9 Using PID Controller 1
PIDs
ROLL 4.1 0.040 23
PIT 4.9 0.043 24
YAW 8.5 0.045 0
RR 0.28
PR 0.28
YR 0.53
TPA 0.00
Like us on our FaceBook Page & Instagram
/
ZMR V2 Frame Only
- - - - - - - - - - -
ZMR V2 ARF KIT
- - - - - - - - - - -
In this video we’ll cover some of the ARF options with this kit, go through our build and what parts we used, then follow it up with a first flight and you will be seeing it’s first ever flight.
On this quad, we’ve flashed the ESC to BLHeli V14 and enabled oneshot. The ESCs are mounted internally to allow for a cleaner build. We used Bullnose props instead of the 5030 since we needed more thrust due to carrying the heavier weight of the GoPro.
NOTE: I printed 4mm PLA 3D printed washers that go between the PDB and bottom Plate which which means the top plate is secured through to the bottom carbon plate and that addresses the problem of upside down crash impact transferring just to the PDB Board.
AUW (Less Battery)
501g
Initial PIDs used during this flight
Cleanflight V1.9 Using PID Controller 1
PIDs
ROLL 4.1 0.040 23
PIT 4.9 0.043 24
YAW 8.5 0.045 0
RR 0.28
PR 0.28
YR 0.53
TPA 0.00
Like us on our FaceBook Page & Instagram
/
ZMR V2 Frame Only
- - - - - - - - - - -
ZMR V2 ARF KIT
- - - - - - - - - - -
Rcreviews.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Advertising