Simon Hahnel - Channel
-
ZMR250 / QAV250 grows to ZMR430 Quadcopter. Final build with ESC and KK2.1HC
Add some Motors, ESCs, a KK2.1HC, Receiver and some wire and you have a Quadcopter -
DIY Wooden H 680 Quadcopter Build Part 2. The Motors. Will use the KK2.1HC.
Got some motors from EBAY. Just comparing them to the Turnigy Motors I have always used and mount... -
Turnigy Talon Octocopter 2836 750kV Motors New Skids and 11 inch Propellers
Updated with New Skids and trying out some 11 x 4.7 inch Props. This Octocopter in now ready to t... -
Diatone 260 HK260 Quadcopter Build with Sunnysky 2300kv 2204 motors AFRO ESC and KK2.1.5
I loved my HK250 so though I would try building the HK260 with the upturned arms. HK20 Frame Su... -
Diatone 260 HK260 Quadcopter first Full Throttle Flight Sunnysky 2204 2300kv Motors Afro 12a ESC KK2
Not too shabby, HK260 FPV Frame Sunnysky 2300kV Motors Afro 12a ESC (SimonK) 1300 Zippy 20c 3s ... -
Diatone 260 HK260 Quadcopter RC911 for KK2.1 Test Flight and new firmware feature
RC911 has added motor testing to his firmware. Love it. -
V913 Final Flight. Flybar Mod No.2 Does not goe as well as hoped. Pilot error
I have been flying Quads for the last 12 months and have forgotten how to fly my v913. Using the ... -
ZMR250 / QAV250 grows to ZMR430 V2 Quadcopter. Flying Nicely KK2.1HC
Tuned the KK2.1HC and now it is flying pretty well. -
QAV250 First ACRO Flight with KK2.1.5 RC911 and BMW i8 for good measure
I have installed my KK2.1.5 Flight Controller onto my QAV250 with RC911 firmware installed. This ... -
APM Arducopter 2.6 on my SK450 Testing. Total Fail. Crash and still flies with bent Props.
I had this controller running perfectly the previous night. RTL. Loiter. All great. Today Total f... -
Turnigy Talon Octocopter 320mm Boom Extension 2836 750kV Motors KK2.1 UBEC 30a ESCs
My favorite motor prop combination are these Turnigy 2836/11 750kV with the 10" x 4.5 slow flys. ... -
APM 2.6 SK-450 Quadcopter with 2836 750kv motors and UBEC 30a ESCs. Good combination.
Have raided the parts from my 2 SK-450 Quads and used the parts that have combined the best. Now ...
Advertising